LTM-2 Pulp Level Monitoring Probe
from Zeroday is easier to use

January 21, 2014 by Bill Hancock Comments Closed

New LTM-2 Probe ready to shipLTM-2 Monitoring Probe

Instek Control has further advanced slurry and pulp level monitoring and measurement capabilities by introducing a second generation of the LTM probe. The LTM-2 monitoring probe uses the same effective conductive probe technology but is now easier to specify, install and use.

Among key improvements to the original LTM probe technology:

  • A ‘plug and play’ sensor
  • Uses a 2-wire instead of 4-wire power and signal connection:
    The reduced measuring range is eliminated, simplifying specification and installation
  • Calibration adjustments are unnecessary when conditions change
  • Is calibrated via USB computer interface

LTM products provide superior pulp-level interface monitoring through the benefits of conductance technology and advanced digital signal processing logic. Ideal for monitoring froth or foam covered process cells, tanks and sumps, the LTM probe precisely monitors slurry and pulp interfaces which provides improved level measurement increases process control, oftentimes dramatically. Not only is the interface precisely measured, the probe provides 10 signals per second which for all practical purposes is instantaneous. This allows faster process response times for pump sumps and process equipment.

Key LTM-2 features include:

  • Customized lengths from minimum 50 millimeters (2 inches) to 3,000 mm (9.8 feet) in length
  • Measurement range of 50-3000 mm possible
  • 316 stainless steel rod, 304 stainless steel adaptor and head
  • IP 69K-rated protection class
  • Response time < 100 milliseconds
  • Resolution is <0.1% for probes >500 mm length <1.0 mm for probes < 500 mm in length
  • Linearity < 1.0% of rod length
  • Can operate in slurries and pulps up to 140° C (284° F)
  • Probe measurement is accurate to 1 μS meaning probe is robust with scaling andsolids buildup
  • Ideal for adhesive and pasty fluids

For further information, please contact Zeroday Enterprises by email at support@ZerodayLLC.com or telephone +1 (503) 582-9067.

Download Data Sheet

Categories: LTM-2 Probe

Comments are closed.