LTM-2 Slurry Level Measurement Probe: Alternative Devices Performance Comparisons

LTM-2 Slurry Level Measurement Probe: Alternative Devices Performance Comparisons

March 17, 2020 by cuprum 0 comments

There are a myriad number of slurry level measuring devices available for measuring pulp levels in flotation cells, sumps and tanks that use a wide range of technical principles. Zeroday’s LTM-2 conductive probes have number of distinct advantages over alternative devices: Effectively measures the interface between pulp and froth/foam No mechanical moving parts 0.1% measurement […]

Read More

Categories: LTM-2 Probe, Slurry Level
Benefit of Using LTM-2 in Enclosed Flotation Cells

Benefit of Using LTM-2 in Enclosed Flotation Cells

January 28, 2020 by Bill Hancock 0 comments

Some operations fully enclose to make airtight their flotation cells to minimize sulfide mineral oxidation and control bulk water chemistry occurring from oxygen; the air from collapsed froth is recycled by the float cell and/or N2 gas is used as the flotation air. The enclosure makes effective slurry level monitoring challenging as operators cannot easily […]

Read More

Categories: LTM-2 Probe, Products, Pulp Level
LTM-2 CE Certification

LTM-2 CE Certification

December 5, 2019 by Bill Hancock 0 comments

Occasionally Zeroday’s North American customers express a need for UL (Underwriting Laboratories) or CSA (Canadian Standards Association) certification that entails third party testing and certification. The UL and CSA requires on-going periodic recertification as well. Maintaining UL or CSA certification is expensive, particularly for a relative low sales volume device compared to other electrical products […]

Read More

Categories: LTM-2 Probe, Products, Pulp Level
LTM-2 Slurry Level Probe PowerPoint Presentation

LTM-2 Slurry Level Probe PowerPoint Presentation

October 14, 2019 by Bill Hancock 0 comments

Zeroday developed an LTM-2 slurry level measuring probe presentation for introduction and training purposes. This PowerPoint product overview provides product details, operating principles, benefits, range of customers who have made the switch to LTM-2 technology and ordering information. More information is provided on Zeroday’s LTM-2 webpage, a series of LTM-2 blog posts, and the supplier […]

Read More

Categories: LTM-2 Probe, Products, Pulp Level
Z ChemGear Chemical Systems Design Considerations

Z ChemGear Chemical Systems Design Considerations

August 21, 2019 by Bill Hancock 0 comments

Each chemical class, and even within that class, have physical, chemical, safety and environmental differences that must be considered when designing and building chemical systems. Z ChemGear systems are designed, engineered and fabricated to fully account for each chemical’s unique characteristics to ensure maximum and efficient chemical utilization. This presentation provides details on chemical characteristics […]

Read More

Categories: Chemical and reagent systems, Chemicals
Z ChemGear D1500 Flocculant Mixer Shipment to Simplot Pocatello

Z ChemGear D1500 Flocculant Mixer Shipment to Simplot Pocatello

July 11, 2019 by cuprum Comments Closed

Mainland Machinery shipped a Z ChemGear D1500 dry flocculant mixer to JR Simplot’s Don phosphoric acid production plant in Pocatello, ID. The mixer is being incorporated in an existing flocculant mixing system where the mixer will replace the present mixer and be tied to the existing solution day tank and feed pumps. Following are the […]

Read More

Categories: Flocculants, Mainland Machinery, Mixers
Coeur Silvertip’s Z ChemGear D300 Flocculant Mix-Feed System Delivered

Coeur Silvertip’s Z ChemGear D300 Flocculant Mix-Feed System Delivered

June 20, 2019 by Bill Hancock Comments Closed

Mainland Machinery fabricated, shipped and started up a Z ChemGear D300 dry flocculant mix-feed system for Coeur Mining’s Silvertip Mine which is located near the Yukon border west of Watson Lake. A 300 lb/day (140 kg/day) flocculant mixing-feed system is an over-under tank design concept developed by Zeroday Enterprises. This fully automatic system design features […]

Read More

Categories: AFX Mixing and Pumping Technologies, Flocculants, Mainland Machinery, MixersTags:
Interfusão Distribuidor Partners with Zeroday Enterprises as Master Agent

Interfusão Distribuidor Partners with Zeroday Enterprises as Master Agent

January 7, 2019 by cts-admin Comments Closed

Sao Paulo Brazil-based Interfusão Distribuidor and Oregon USA based Zeroday Enterprises announce they entered into a formal commercial partnership to develop the Latin America and SW USA markets. Interfusão is a Zeroday Master Agent and responsible for building out a distributor network throughout Latin America as well as pursue direct USA sales. Product lines that […]

Read More

Categories: Chemical and reagent systems, LTM-2 Probe, Peristaltic Pumps
Xanthate Mix System Installation Update

Xanthate Mix System Installation Update

December 18, 2018 by cts-admin Comments Closed

The installation of the large capacity xanthate (PAX) Z ChemGear™ mixing-feed system has been successful! This system has a 2,400 gallon (9.1 m3) live xanthate mixing capability for 10-30% solution concentrations, depending on how many supersacks are emptied into the mixing tank. Solutions are transferred to a day tank having 3,000 gallon (11.4 m3) live […]

Read More

Categories: Mixers, News
Mainland Machinery ships large xanthate mixing-feed system

Mainland Machinery ships large xanthate mixing-feed system

November 13, 2018 by Bill Hancock Comments Closed

Zeroday chemical systems partner Mainland Machinery has shipped a large PAX (potassium amyl xanthate) mixing-feed system to a Caribbean flotation mill. Based on Zeroday’s Vale Thompson Manitoba mill PAX mixing system design, this system additionally incorporates a day tank with transfer and dosing pumps. Key system design criterion and elements include: 2600 gallon mix tank, […]

Read More

Categories: Mixers, News, Process
Next Page »