Mining Industry Advances Coarse Particle Flotation Recoveries

Mining Industry Advances Coarse Particle Flotation Recoveries

November 1, 2017 by Bill Hancock 0 comments

In many cases, flotation is a highly effective mineral recovery unit operation.

Read More

Categories: Flotation, Process, Reagents
Bill Hancock Becomes SME Foundation President

Bill Hancock Becomes SME Foundation President

March 3, 2017 by Bill Hancock 0 comments

Bill Hancock assumed the Society of Mining, Metallurgy and Geology (SME) Foundation Presidency during the recent SME Annual Conference and Exhibit.

Read More

Categories: News
LTM-2 Probes Provide Consistent Sump Level Measurement Resulting in Better Cyclone Performance

LTM-2 Probes Provide Consistent Sump Level Measurement Resulting in Better Cyclone Performance

February 14, 2017 by Bill Hancock 0 comments

Mill’s have shown a significant interest in using LTM-2 probes for measuring secondary mill sump pulp levels…

Read More

Categories: LTM-2 Probe, Sumps
Instek LTM Probes provide faster response times and superior pulp level monitoring

Instek LTM Probes provide faster response times and superior pulp level monitoring

November 9, 2016 by Bill Hancock 0 comments

Do you need reliable signals with accurate pulp level detection, low maintenance costs AND simultaneously increase your recoveries?

Read More

Categories: LTM-2 Probe, Pulp Level, Slurry Level, Sumps, z ChemGear
Zeroday Announces Mainland Machinery Partnership

Zeroday Announces Mainland Machinery Partnership

September 2, 2016 by Bill Hancock 0 comments

Zeroday Enterprises LLC and Mainland Machinery Ltd are pleased to announce a partnership to advance Zeroday’s chemical mixing and feeding technology.

Read More

Categories: News
Determining LTM-2 Probe Length

Determining LTM-2 Probe Length

November 16, 2015 by Bill Hancock 0 comments

Determining LTM-2 probe length is fairly straight forward.

Read More

Categories: LTM-2 Probe, Sumps
Laboratory Flotation Test Procedure to Maximize Data Analysis

Laboratory Flotation Test Procedure to Maximize Data Analysis

August 17, 2015 by Bill Hancock 0 comments

Establishing and following a well-developed laboratory test procedure will provide good metallurgical performance data.

Read More

Categories: Testing Procedures
PAX Mixer shipped to Vale Thompson

PAX Mixer shipped to Vale Thompson

July 29, 2015 by Bill Hancock 0 comments

Zeroday designed, engineered, fabricated and assembled this custom system.

Read More

Categories: Mixers, News
NEMISA Z ChemGear<sup>™</sup> D100 Dry Flocculant System

NEMISA Z ChemGear D100 Dry Flocculant System

July 14, 2015 by Bill Hancock [ 1 ]

Zeroday shipped a new D100 dry flocculant mixing-feeding systemto Negociacion Minera de San Luis Potosi NEMISA unit, located near San Luis Potosi, Mexico.

Read More

Categories: AFX Mixing and Pumping Technologies, Flocculants, Mixers, News, z ChemGear
Zeroday ships Z ChemGear<sup>™</sup> D100 Flocculant System to NJ Mining

Zeroday ships Z ChemGear D100 Flocculant System to NJ Mining

June 30, 2015 by Bill Hancock 0 comments

NJ Mining’s sulfide flotation mill is located east of Kellogg, ID.

Read More

Categories: AFX Mixing and Pumping Technologies, Flocculants, Mixers, News, z ChemGear